Wastewater Treatment
Industrial effluent rarely matches a standard design. We start from the actual load — COD, BOD, fats, oils and grease, shock loads, and discharge limits — then build the train that meets the permit: screening and grease removal, equalisation, extended aeration or MBBR, clarification, sludge handling, and disinfected reuse for irrigation or process cooling.
Engineering Flow Sequence
Wet Well Intake
Source water collection
Screening
Coarse and fine basket screens
Heavy Duty Pumping
Lifting via high-head sets
VFD & Control
Automated discharge regulation
Surge Protection
Anti-hammer vessels
Distribution
Reclamation supply lines
Wet Well Intake
Source water collection
Screening
Coarse and fine basket screens
Heavy Duty Pumping
Lifting via high-head sets
VFD & Control
Automated discharge regulation
Surge Protection
Anti-hammer vessels
Distribution
Reclamation supply lines
Delivery Scope
Stage-by-Stage Engineering Execution
Every plant stage is engineered, built, and tested in-house with documented quality gates from intake to handover.
Collection & Screening
Gravity and pressurised collection with mechanical screening and grit removal.
- Network and lift station design
- Bar screens and grit chambers
- Grease traps for food-industry loads
Equalisation & Primary
Buffering shock loads so the biological stage sees a stable feed.
- Equalisation basin with mixing
- DAF or primary sedimentation
- pH and nutrient correction dosing
Biological Treatment
Extended aeration, MBBR, or SBR selected on load, footprint, and operator capacity.
- Aeration blowers and diffuser grids
- Biomass control and sludge age management
- Secondary clarification and return sludge
Tertiary & Reuse
Polishing to reuse standards for irrigation, washdown, or cooling makeup.
- Sand and disc filtration
- Chlorination or UV disinfection
- Reuse storage and distribution
Sludge & Compliance
Sludge dewatering, disposal routing, and the sampling record the authority asks for.
- Thickening and drying beds or filter press
- Effluent sampling and logbooks
- Discharge permit documentation
Technology & Systems
Engineered Equipment Packages
Intake
Lift stations, submersible pumps, bar screens, grit and grease removal
Treatment Train
Equalisation basins, DAF, aeration tanks, MBBR media, clarifiers, chlorine contact
Pumping Skids
Return/waste sludge pumps, blowers, dosing pumps, reuse transfer sets
SCADA & Controls
DO / pH / level instrumentation, blower VFD control, alarm and trend logging
O&M
Biology tuning, chemical supply, sludge disposal logistics, compliance reporting
Proven Execution
Delivered Projects in This Sector
22-Station Pumping ComplexToshka Multi-Station Pumping System (22 Hubs)
National Service Projects Organization (NSPO)
Critical desert lifting, pumping, and distribution infrastructure to support strategic agricultural reclamation in Toshka under harsh ambient temperatures and high hydraulic heads.
Industrial Agro-Effluent Treatment TrainShubra Shahab Industrial Wastewater Treatment Facility
Agro-Industrial Development Authority
An agro-industrial processing complex required a specialized industrial wastewater treatment facility to treat high-load organic and chemical effluents in full compliance with environmental standards.
Industrial Agro-Effluent Treatment TrainFood City Industrial Wastewater Treatment
Food City Industrial Complex (Biscuit Factory)
An industrial food complex discharged high-load effluent that had to meet municipal compliance limits before release.
Ready to engineer your wastewater treatment infrastructure?
Single accountable contract covering process design, supply, civil works, installation, commissioning, and operation.